Pump Reinforcement Mod

This is an easy mod that you can do to make sure your pump won’t snap.

You Will Need:
A dowel rod
Silicone Glue

Step 1: Dissassemble Your Weapon


Step 2: Disassemble Pump


Measure the length of the pump shaft up to the hole where the pump handle connects through it.  This is the length at which you will need to cut your dowel.  If it is too long then you won’t be able to put your pump handle back on.

Step 3: Insert Dowel Rod


Lube the dowel up with some silicone glue prior to sliding it into the pump.

Step 4: Reassemble



One thought on “Pump Reinforcement Mod

  1. Pingback: Max D 6000 | Hydrowar

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s